Kenmore ASPIRADORA 116.35913 - Manual (Page 12)

PERFCmMANCBSAreTY TCATURES
MOTOR PROTECTION SYSTEM
Motor Protector
This vacuum cleaner has a motor protector
by-pass valve which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. If the by-pass valve
opens to prevent motor overheating and
possible damage to the vacuum cleaner,
you will notice a change of sound as air
rushes through the valve opening.
To correct problem; See the TROUBLE­
SHOOTING section.
NOTE: The motor
protector may open
when using
attachments or
when cleaning new
carpet, due to
reduced airflow
caused by the
attachments
themselves or by
new carpet lint filling
the dust bin quickly.
See the TROUBLESHOOTING section. Motor Protector
(Behind Hose)
Note: Do not block motor protector.
Thermal Protector
This vacuum cleaner has a thermal
protector, which automatically trips to
protect both the vacuum cleaner and the
agitator motor from overheating. If a clog
prevents the normal flow of air to tfie motor,
the thermal protector turns the motor off
automatically. This allows the motor to cool
in order to prevent possible damage to the
vacuum cleaner.
To correct problem; Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum cleaner to
cool and the thermal protector to reset.
Check for and remove dogs, if necessary.
See page 19, CLOG REMOVE section.
Also check «md replace any dogged filters.
Wait approximatety tttirty (30) minutes and
plug the vacuum cleamer In and turn back
on to see if the motor protector has reset.
AGITATOR MOTOR
OVERLOAD PROTECTOR
The agitator motor has built-in protection
against motor damage should the agitator
jam. If the agitator slows down or stops, the
agitator overload protector shuts off the
agitator motor. The vacuum cleaner motor
will continue to run.
To correct prd>lem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press reset button.
To reset: Push in
the agitator
overload protector
button.
If the prIem persists, have the vacuum
deaner serviced by a Sears or other
qualified technidan.
12