Seif-cleaning, Press, Display – Kenmore 790.7755 User Manual
Page 34: Stopping or interrupting a self-cleaning cycle, 3u hot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Seif-Cleaning
•
Setting Flex Clean
•
Setting Delay Flex Clean
INSTRUCTIONS
1. The time of day, "HOT", "DOOR LOCKED " and " CLEAN " icon
will remain in the display (See Fig. 7).
2. Once the oven has cooled down for approximately 1 HOUR, and
the " DOOR LOCKED " icon is no longer displayed, the oven
door can then be opened.
PRESS
DISPLAY
3u Hot
Fig.7
J
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press (s^.
2. Once the oven has cooled down for approximately 1 HOUR and
the " DOOR LOCKED " icon is no longer displayed,the oven door
can then be opened (See Fig.
8
).
Fig.8
IMPORTANT NOTES when using the Self-Clean feature:
1. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
2. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see instructions for setting the control for the 24
hour time of day display mode.
34