beautypg.com

Filter changing/cleanin, Warning, Electrical shock hazard – Kenmore 116.3172 User Manual

Page 15: Primary filter, To remove primary filteri, To replace primary filter, Pyhai pll tpr hepa, Filter changing/cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

FILTER CHANGING/CLEANIN

WARNING

Electrical Shock Hazard

Unplug power cord from electrical
outlet. Do not operate the cleaner

without the primary or exhaust fil­

ters. Be sure the filters are properly

installed to prevent motor failure
and/or electrical shock.

PRIMARY FILTER

The filter CANNOT be washed as it will
lose its dust trapping ability.

Check primary filter frequently and clean
when dirty.

TO REMOVE PRIMARY FILTERi

Remove the dust bin and dust bin lid

assembly as outlined in the DUST BIN
CLEANING section.

Remove fil­

ter cover by
pushing in
at tabs
located
beneath
handle
hinges, and
lifting off.

l3fA# f lA A CCiCiÄÄJCi# V

f JuSfJV

i

Fiiter

Handle

Filter

Grasp filter handle
and lift out

Clean primary filter by
gently tapping over a
trash container.

TO REPLACE PRIMARY FILTER:

Replace filter and
rotate it until handle
drops into the slots.

Check sliders and
remove any obstruc­
tions

Slots

Slider

Filter

Cover

Handle

Hinge

Replace dust bin
lid by snapping
into place with
handle hinges

aligned to tabs.

Replace the dust bin as outined in the
DUST BIN CLEANING section.

PYHAI Pll TPR

HEPA

The exhaust filter cartridge must be

replaced when dirty, it should be replaced
regularly depending on use conditions. The

fiiter CANNOT be washed as it will lose

its dust trapping ability.

NOTE* See PARTS AND FEATURES for the

I V I №■■■ ■

\jr\Jt X X 11 \jjM i \i W I irnttf I { I

m

I I IXttM Vi,«

i v/i vl 1 Ur

exhaust filter part number.

Press inward on

each side of
exhaust filter
cover and puli
out to remove

from vacuum
cleaner

Exhaust

Filter

Cover

It

Press

Inward

Remove the
exhaust filter car­

tridge.

Replace the exhaust filter
cartridge, carefully posi­

tioning it so that it fits into

the motor coven The grey

edge of the fiiter should
be facing away from the

operator. Push only on fil­
ter cartridge frame, not on
filter itself.

Replace the exhaust filter cover by placing

tabs in slots and pushing in until cover
snaps into place.

15

This manual is related to the following products: