Status indicator lights, Control settings, About the dishwasher control panel – GE EDWSO00 User Manual
Page 6: Cycles
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/664916/6/background.png)
O
■S
o
3
b
to
c
V)
C
to
You con locate your model number on the tub wall just inside the door. Throughout this manual, features and
appearance may vary from your model.
About the dishwasher control panel.
(For models without a sensor: EDW4000 Series,
EDW5000 Series, GHDA400 Series, GLD4000 Series, GLD5000 Series and HLD4000 Series)
Control Settings
to
.CL
cn
.C
o
o
-c
(A
-Si
3
3
R
§-
to
B
3
to
co
o
Status Indicator Lights
The Status display tells you what's happening while the dishwasher is in operation and may flash,
indicating a malfunction (see page 8). The lights will come
ON
indicating the sequence
of operation the dishwasher is in.
SANITIZED
(on some
models)
Displayed when cycle has met sanitization conditions. Light remains
ON
until
door is opened.
CLEAN
(on some
models)
Displayed when a wash cycle is complete. The light stays
ON
as a reminder that
the dishes are clean until the door is opened or until another cycle is selected.
Cycles
The light above the selected pad will be ON to indicate which cycle has been selected.
SANI WASH
(on some
models)
7.3 gal., 97 min.
This cycle raises the water temperature in the final rinse to sanitize your dishware.
The cycle length will vary depending on the temperature of your inlet water.
NOTE:
The
SANI-WASH
cycle is monitored for sanitization requirements. If the
cycle is interrupted during or after the main wash portion or if the incoming water
temperature is so low that adequate water heating cannot be achieved, the
sanitizing conditions may not be met. In these cases, the sanitized light will not
illuminate at the end of the cycle.
NOTE:
NSF certified residential dishwashers are not intended for licensed food
establishments.
POTS & PANS
or
HEAVY
WASH
8.5 gal.. 89 min.
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-
on soils. Everyday dishes are safe to be used in this cycle.
NORMAL WASH
5.9 gal.. 56 min.
This cycle is for medium/heavily soiled dishes and glassware.
LIGHT WASH
(on some
models)
6.1 gal., 36 min.
This cycle is for everyday dishes and glassware.
CHINA CRYSTAL
6.1 gal., 39 min.
(on some This cycle is for lightly soiled china and crystal,
models)
RINSE ONLY
1.2 gal., 6 min.
For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
NOTE:
Only the
SANI-WASH
cycle has been designed to meet the requirements of Section 6,
NSF 184 for soil removal and sanitization efficacy.