H insert cooktop into cutout, Attach hold-down brackets to cabinet, Important – GE PHP960DMBB User Manual
Page 9: Installation instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions
H INSERT COOKTOP INTO CUTOUT
Insert the cooktop centered into the cutout opening.
Moke sure the front edge of the countertop is
parallel to the cooktop. Make final check that all
required clearances are met.
ATTACH HOLD-DOWN BRACKETS
TO CABINET
Open the cabinet door. Install the second screw
through the bracket and tighten. Then tighten the
first screw. Install thumbscrew until it touches the
bottom of the countertop.
Countertop
IMPORTANT:
Turn the thumbscrew until it touches
the bottom of the countertop. Do not overtighten.
This manual is related to the following products: