H install baffle, H install hold-down brackets, Installation instructions – GE PHP960DMBB User Manual
Page 8: Installing the cooktop [h
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Instructions
INSTALLING THE COOKTOP
[H
PROTECT SURFACE OF COOKTOP
H
ATTACH FOAM TAPE
Place a towel or tablecloth onto the countertop.
Apply the foam tape around the outer edge of the
Lay the cooktop upside down onto the protected
glass. Do not overlap the foam tape.
surface.
Bottom of Cooktop
Bottom of Cooktop
\\ Foam Tape
^ A
Glass ^ ^
NOTE:
On stainless steel models, apply foam tape
cloth under Cooktop
on the sides and rear.
[H INSTALL BAFFLE
Secure the baffle to the cooktop with screws.
NOTE:
Do not install the baffle when the cooktop
is installed over a single oven.
H INSTALL HOLD-DOWN BRACKETS
Start one screw through the bracket and into
the cooktop. (Both sides.) Do not tighten. Turn
the bracket inwards to avoid interference when
dropping the cooktop into the countertop.