Checklists, It] pre-test checklist, Iti operation checklist – GE PHP960DMBB User Manual
Page 10: Splice copper wires to, Installation instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions
CHECKLISTS
IT] PRE-TEST CHECKLIST
H Remove all protective film, if present, and any
stickers.
E Check to be sure that all wiring is secure and
not pinched or in contact with moving parts.
E Check level of appliance.
E Check that the cooktop is properly grounded.
ITI OPERATION CHECKLIST
E Remove all items from the top of the cooktop
surface.
E Turn on the power to the cooktop.
(Refer to your Owner's Manual.) Verify that all
surface burners operate properly.
E Check that the circuit breaker is not tripped
nor the house fuse blown.
E Check that conduit is securely connected to
thejunction box.
E See Owner's Manual fortroubleshooting list.
NOTE TO ELECTRICIAN:
The power leads supplied with this appliance are
UL recognized for connections to larger gauge
household wiring. The insulation of these leads
is rated at temperatures much higher than the
temperature rating of household wiring. The current
carrying capacity of a conductor is governed by the
wire gauge and also the temperature rating of the
insulation around
the wire.
NOTE: ALUMINUM WIRING
• WARNING:
IMPROPER CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
•
Splice copper wires to
aluminum wiring using
special connectors designed and UL approved
forjoining copper to aluminum and follow
the manufacturer's recommended connector
procedure closely.
NOTE:
Wire used, location and enclosure of splices,
etc., must conform to good wiring practice and
local codes.
10