Prerequisites – Cisco OL-6030-01 User Manual
Page 2
2-2
System Manager’s Guide for Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
OL-6030-01
Chapter 2 Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
How to Install Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
•
Release 4.2.5 requires anonymous authentication. If Cisco MeetingPlace Web Conferencing is set
up to use web authentication, Release 4.2.5 must be installed on a separate server with a dedicated
Cisco MeetingPlace Web Conferencing server installed.
•
If you use a hostname, domain name system (DNS) must be enabled to resolve the hostname to an
IP address.
•
Each user must be associated with a Cisco IP phone. For additional information, see the
documentation for your release.
•
If you are running other Cisco MeetingPlace gateways that use the MeetingPlace Agent Service, we
recommend that you stop this service prior to installing Release 4.2.5.
How to Install Cisco MeetingPlace for Cisco IP Phone
Release 4.2.5
To install Release 4.2.5, perform the following procedures in the order shown:
•
Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5, page 2-2
•
Configuring the Cisco MeetingPlace Service in Cisco CallManager, page 2-3
Prerequisites
Verify the path of your Cisco MeetingPlace Web Conferencing installation.
Installing Cisco MeetingPlace for Cisco IP Phone Release 4.2.5
To install Release 4.2.5, perform the following steps:
Step 1
To obtain Release 4.2.5, go to
.
Step 2
Enter your Cisco.com User Name and Password and click OK.
Step 3
Under the Cisco MeetingPlace product heading, click MeetingPlace IP Phone.
Step 4
Download the Cisco MeetingPlace IP Phone Integration Release 4.2.5 zip file.
Step 5
If your Cisco MeetingPlace Web Conferencing release is installed in <drive>:\Program Files\Cisco
Systems\MPWeb, install Release 4.2.5 by unzipping the files from the Cisco MeetingPlace IP Phone
Integration zip file to this directory.
or
If yourCisco MeetingPlace Web Conferencing release is installed in <drive>:\latitude\mpweb directory,
install Release 4.2.5 by unzipping the files from the Cisco MeetingPlace IP Phone Integration zip file to
this directory.
This installation is a full install and contains only scripts and templates.