Canon i 950 - Manual (Page 4)

4. Measure 15cm from the edge of the printer and make a mark: then tear off the sticker
(Picture A) and attach Support Arm to the printer as the Picture B shows.
(Picture A) (Picture B)
5. Attach the small tube clamp at the right of the printer and Make sure it is parallel with
the Support Arm as the below picture shown.
6. Insert the cartridge into the cartridge carriage; Make sure the cartridge is down all the
way and they are making contact with the printer;
7. Put the Tube into the Support Arm and Small Tube clamp as the below picture shown.