Whirlpool ET25DQ - Manual (Page 8)

U S I N G Y O U R R E F R I G E R A T O R
Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
• Use the OFF setting when humidity is low.
• Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjust­
ments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our Consumer Assistance
Center number. (See page 27.)
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator • Door opened often Refrigerator 4
section
too warm
• Large amount of food added
• Room temperature too warm Freezer A
Freezer • Door opened often Refrigerator 3
section
too warm
• Large amount of food added
• Very cold room temperature
(can’t cycle often enough)
Freezer C
Refrigerator • Controls not set correctly Refrigerator 2
section
too cold
for your conditions Freezer B
Ice not
• Heavy ice usage Refrigerator 3
made fast
enough
• Very cold room temperature
(can’t cycle often enough)
Freezer C
Both • Door opened often Refrigerator 4
sections
too warm
• Large amount of food added
• Very warm or very cold room
temperatures
Freezer B