Lft-up cooktop and surfaq burners, If the ports are clogged, clean with a straight, Cooktop – Whirlpool FGP315E User Manual
Page 18: Surfaq, Burners, Awarning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARING FOR YOUR RANGE
L
ft
-
up
cooktop
and
surfaq
burners
1. Remove the surface burner grates.
3. Wipe the surface under the cooktop with warm,
soapy water and a
sponge. Use a soap-
filled plastic scrubbing
pad on heavily soiled
areas.
AWARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
Lift the front of cooktop at both front corners
until the support rods
lock into place.
NOTE: Do not drop the
cooktop. Damage could
result to the porcelain
and the cooktop frame.
Check the burner flames once in a while for proper
size and shape as shown.
A good flame is blue in
color. If flames lift away
from ports, are yellow,
or are noisy, turn off the
burner. Allow the burner
to cool and follow Step p.
If you still have a problem,
contact an authorized
Roper service technician
to check the air/gas
mixture or see the Installation Instructions.
If the ports are clogged, clean with a straight
pin. DO NOT enlarge
or distort the ports.
DO NOT use a tooth
pick to ciean the ports.
Toothpick pieces may
clog the ports.
4.
Wipe off the surface burners with warm, soapy
water and a sponge after
each use. To remove
cooked-on food,soak
the burners in a vinegar
and water solution for
20-30 minutes. Then
scrub them with a
plastic scrubbing pad.
(See page 17 for more
information.)
18