Using timed drying, Press on/select, On ^ select j – Whirlpool 3396304 User Manual
Page 9: Press select, Press start, Start
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O P E R A T I N G Y O U R D R Y E R
Using Timed drying
Use Timed drying to complete drying if some
items are damp after Automatic drying. Timed
drying is also useful fo dry delicate items that
require a short drying time.
1. Press ON/SELECT
until the light glows by the Cycle/Temp
desired.
PRESS
YOU SEE
On ^
Select
J
rs
Heg/Heavy-H^ ^
a PsimPren-tM
0ellcal66-ijow
a Fluff Air-No HMt
□ TimUe Press-tM
Damp Dry-Hgh ^
2. Press SELECT
until the light glows below Timed” and by
the desired drying time. (Change Options, if
desired. See pages 13-14.)
NOTE: If you select the Reg/Heavy, Perm
Press or Délicates cycle, an Automatic
dryness is preset. If you desire Timed
dryness insfead, continue fo press SELECT
until the Timed light glows (Automatic light
shuts off) and the light glows by the desired
time. If you pass the desired time, continue
to press SELECT until the light glows under
Timed and by the desired time.
PRESS
YOU SEE
Timed
1
-)K- 1
90 Min
70 Min
50 Min
№
30 Min
10 Min ,
3. Press START.
PRESS
Start
3