Whirlpool 3396304 - Manual (Page 8)

O P E R A T I N G Y O U R D R Y E R
Using Automatic drying
Use Automatic drying to dry most ioads. Your
dryer automaticaily shuts off when the selected
dryness is reached.
Reg Dry is the preset automatic dryness
selected for Reg/Heavy-High, Perm Press-
Med, and Delicates-Low cycles. You can
change the Automatic setting (or select a
Timed setting) to match your load.
1. Press ON/SELECT
until the light glows by the Cycle/Temp
desired (Reg/Heavy, Perm Press, or
Délicates).
PRESS
r ^ T ]
Select
J
YOU SEE
Cycles/Temps Automatic
Ra(^Haav)HVi ^
□ P*miPnu4M
■w OdcriMHM
□ FUAJHkM
a Tianbbn«M4kd
Id
DmpDtyt*^ ,
’’
'V Verity
More Dry
1
Reg Dry
Less Dry
^ Least Dry
1
2. Press SELECT
until the light glows below “Automatic” and
by the desired Automatic dryness. (Change
Options, if desired. See pages 13-14.)
PRESS
Select
YOU SEE
Automatic
VeryBty
More Dry
Reg Dry
Less Dry
Least Dry
3. Press START. PRESS
Start
Use Automatic drying to dry most
loads
If you want to dry a load using a Timed setting,
see “Using Timed drying” on page 9.
• If the load is drier than you like, select LESS
DRY or LEAST DRY the next time you dry a
similar load.
• If the load is not as dry as you like, complete
drying using a Timed setting. Select MORE
DRY or VERY DRY the next time you dry a
similar load.
NOTE: When you press Select, the Automatic
dryness settings are selected first (starting with
Reg Dry). Continue to press Select for a Timed
setting (see page 9).
Automatic
i
-m-
Very bry
R
More Dry M
Reg Dry
Less Dry
^ Least Dry S
8