To change crisper light, To change light below ice bin, To change dispenser area light – Whirlpool 2194182 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

To change crisper light:

1. Unplug the refrigerator.
2. Pull top of light shield forward until it

snaps free.

3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.

5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Plug in the refrigerator.

To change light below ice bin:

1. Unplug the refrigerator.

2. Push in sides of light shield and pull

forward until shield snaps free.

3. Replace bulb with a 40-watt appliance bulb.
4.

Replace light shield.

5. Plug in the refrigerator.

To change dispenser area light:

1. Disconnect refrigerator from power

supply.

2. Reach through dispenser area to remove

bulb.

3. Replace with a heavy-duty 10-watt bulb,

which can be purchased from your
Whirlpool dealer.

Reconnect refrigerator to power supply.

NOTE:

Not all commercial appliance bulbs

will fit your refrigerator. Be sure to replace a

bulb with one of the same size and shape.

Light

below

ice bin