Removing the crisper and crisper cover, To remove the cover, Removing the freezer bin – Whirlpool 2194182 User Manual

Page 11: To remove the bin, Removing the freezer shelf, To remove the shelf

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

Removing the crisper and crisper cover

To remove the crisper:

1. Slide crisper straight out to the stop.

2. Lift the front and slide out the rest of

the way.

3. Replace in reverse order.

Pull out to the
stop, lift the
front, and pull
again.

To remove the cover:

1. Hold cover firmly with both hands and lift

front of cover off supports.

2. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on

walls of refrigerator.

2. Lower front into place.

Remove the glass
insert. Lift the

cover front, then
the back.

NOTE: Handle
glass insert with
care. It is heavy.

Removing the freezer bin

To remove the bin:

1. Slide bin out to the stop.
2. Lift the front to clear the stop.

3. Slide bin out the rest of the way.

To replace the bin:

1. Place bin on the slides.

2. Make sure the wire stops clear the front

of the slides.

3. Slide bin in all the way.

Pull out to the

stop, lift the
front, and pull
again.

Removing the freezer shelf

To remove the shelf:

1. Lift right side of shelf off supports.

2. Slide shelf out of shelf support holes.
3. Replace in reverse order.

Step

1 1