Removing the base grille, Changing the light bulbs, Electrical shock hazard – Whirlpool 2194182 User Manual

Page 20: To change refrigerator light, Awarning, Callabmillb-a-lintin

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

Removing the base grille

To remove the grille:

1. Open both doors.

2. Pull base grille forward to release the

support tabs from the metal clips.

3. Do not remove Tech Sheet fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal clips.

2. Push firmly to snap into place.
3. Close the doors.

See cleaning instructions for defrost pan and
condenser coils on page 24.

Condenser coils

Metal

clips

Base
grille

Support
tabs

Changing the light bulbs

AWARNING

Electrical Shock Hazard

Unplug the refrigerator before

changing light bulb.

Failure to do so can result in death

or electrical shock.

To change refrigerator light:

1. Unplug the refrigerator.

2. Reach behind the Control Console to

remove bulb.

3. Replace bulb with a 40-watt appliance bulb.
4.

Plug in the refrigerator.

CALLaBMIllB-A-lintin