Removing the ice maker storage bin, To remove ice bin – Whirlpool 2194182 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

Removing the ice maker storage bin

Remove, empty, and clean the storage bin if:

• the ice dispenser has not, or will not, be

used for a week or more.

• a power failure causes ice in the bin to

melt and freeze together.

• the ice dispenser is not used regularly.

To remove ice bin:

1. Pull the covering panel out from the

bottom and slide it to the rear.

2. Lift the signal arm so it clicks into the OFF

(up) position. Ice can still be dispensed,
but no more can be made.

3. Lift the front of the storage bin and pull

it out.

4. Empty the ice bin. Use hot or warm water

to melt the ice if necessary. Never use
anything sharp

to break up ice in the

bin. This can damage the bin and dis
penser mechanism.

5. Wash with mild detergent. Rinse well.

Do not use harsh or abrasive cleaners

or solvents.

6. When replacing the bin, make sure it is

pushed in all the way. Then push the
signal arm down to the ON position to
restart ice production.

cal