Understanding the status indicators, Lock out, Washing – Whirlpool 980 Series User Manual
Page 16: Water heating, Rinsing, Drying, Add-a-dish, Clean, Understanding the status, Indicators
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

S E T T I N G T H E C O N T R O L S
Understanding the status indicators
LOCK OUT
LOCK OUT
The LOCK OUT feature lets you lock out the
fuiiction of the control
pads. When using
LOCK OUT, you cannot
start the dishwasher.
To use LOCK OUT:
• Press and hold AIR DRY (about 5 seconds)
until the LOCK OUT indicator glows.
WASHING
To turn off LOCK OUT:
• Press and hold AIR DRY (about 5 seconds)
until the LOCK OUT indicator turns off.
WASHING
The WASHING irxlicator glows at the start of
the first fill of any cycle
(except RINSEMASH
LATER) and remains on
until the end of the main
wash.
WATER HEATING
The WATER HEATING indicator glows
whenever water is heated
during a cycle.
WATER HEATING
RINSING
The RINSING indicator glows during the
last two rinses of all
cycles.
DRYING
The DRYING indicator glows during the
drying portion of each
cycle - even if you select
AIR DRY. It turns off at
the ervd of the cycle. If
dishes are not as dry as you expected when
using AIR DRY, either allow longer drying
times (overnight) or do not use AIR DRY.
ADD-A-DISH
The ADD-A-DISH indicator glows as soon
as the dishwasher starts
and keeps glowing until
the main wash portion of
the cycle begins. You
can add an additional item while the indica
tor is on.
CLEAN
The CLEAN indicator glows at the end of a
cycle to show that the
load is clean. All other
indicators turn off. The
CLEAN indicator glows
until you press CANCEL/DRAIN or any other
control pad.
ADD-A-DISH
16