Whirlpool 980 Series - Manual (Page 13)

S E T T I N G T H E C O N T R O L S
CYCLE
A shows what each cycle includes
WASH RINSE
MAIN
WASH RINSE
FINAL
RINSE DRY
CYCLE
TIME
(Minutes)
Normal
Double wash for normal,
everyday soiled loads.
(The Energy Guide label is
based on this cycle.)
• Select HIGH TEMP
WASH to heat water in the main
wash (marked^).
• The water heats to 140“F (60“C) in
the final rinse (marked^) unless
you select LOW ENERGY RINSE.
•t •n
66
*
Heavy
Double wash for cleaning
heavily soiled loads.
• Select HIGH TEMP
WASH to heat water in
the main wash (marked ^).
' The water heats to 140“F (60“C) in
the final rinse (marked ^) unless
you select LOW ENERGY RINSE.
•t •n 76*
Pots-N-Pans
Double wash for maximum
cleaning of cooked-on or
baked-on foods.
• The water heats to
140“F (60“C) in both
washes (ma^ed^).
' The water heats to 140°F (60°C) in
the final rinse (marked^ unless
you select LOW ENERGY RINSE.
•ft 76*
*Cyd« timfl indiides dry tim« and may ba longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cyde time. If the water is already hot enough, the cyde times wiH be as shown.
Using CANCEI7DRAIN
Press CANCEL/DRAIN to cancel a cycle or
clear option selections.
To cancel a cycle:
• Press CANCEL/DRAIN while the dish­
washer is running to start a 2-minute drain.
It will take a few seconds for the drain to
start. If desired, select a new cycle. (See
“Changing a cycle or an option setting” on
page 14.)
continued on next page
13