To clear the indicators, High temp wash, Low energy rinse – Whirlpool 980 Series User Manual

Page 14: Air dry, Changing a cycle or an option setting, During the first minute of a cycle, After the first minute of a cycle, Selecting cycle options

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

S E T T I N G T H E C O N T R O L S

• You can press CANCEUDRAIN again to

stop the drain immediately. Remember to
drain the dishwasher again before starting
a new cycle.

NOTE: A small amount of water remaining
in the dishwasher is normal.

To clear the indicators:

Press CANCEL/DRAIN before starting the

dishwasher to clear all cycle and option
selections.

Selecting cycle options

You can press an Option pad after the
dishwasher starts as bng as the cycle is not
past the point that the option is used. For
example, you can press AIR DRY any time
before the DRYING indicator glows.

After a wash cycle, the dishwasher

remembers the options used and uses the

same options in the next wash cycle unless

new options are selected or the CANCEL/
DRAIN pad is pressed.

HiGH TEMP WASH

When HIGH TEMP WASH is selected, the

dishwasher heats the water during
the main wash of the CHINA/
CRYSTAL, LOW ENERGY,
NORMAL , and HEAVY cycles.

Heating the water helps improve

washing results. The POTS-N-PANS cycle
automatically uses HIGH TEMP WASH.

LOW ENERGY RINSE

When LOW ENERGY RINSE is selected

the dishwasher does not heat the
water during the final rinse of
CHINA/CRYSTAL, LOW

ENERGY, NORMAL, HEAVY,

and POTS-N-PANS cycles.

ENERGY

RINSE

NOTE: LOW ENERGY RINSE saves
energy, but dishes take longer to dry and

some spotting can occur. For best rinsing
and drying results, use a liquid rinse agent.

AIR DRY

When AIR DRY is selected, the air in the

dishwasher is not heated during
the “dry” portion of a cycle. Using
AIR DRY helps save energy, but
dishes take longer to dry arid
some spotting can occur. Some
items (such as plastics) may need towel dry

ing. For best drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats

the air in the dishwasher during the “dry”
portion of the cycle unless you select AIR

DRY.

Changing a cycle or an option setting

During the first minute

of a cycle

1. Press new Cycle and/or Option pads.

2. Check the detergent dispensers. They

must be filled properly for the new cycle.

After the first minute
of a cycle

1. Press CANCEL/DRAIN. A 2-minute drain

cycle starts. Wait for drain cycle to finish.

2. Press a new Cycle pad.

3. If desired, press one or more Option pad(s).
4. Check the detergent dispensers. They

must be filled properly for the new cycle.