Whirlpool 980 Series - Manual (Page 15)

S E T T I N G T H E C O N T R O L S
Adding a dish during a cycle
You can add items to the dishwasher load
anytime the ADD-A-DISH
indicator is on.
ADD-A-DISH
1. Lift up the door latch to stop the cycle.
WaK for spraying action to stop before
opening the door.
2. Open the door arKl add the hem.
3. Close the door, but do not latch h. Wah
30 seconds for the air in the dishwasher
to warm up. Doing so reduces the
amount of moisture in the vent when
restarting a cycle.
4. Close the door firmly until h latches. The
dishwasher resumes the cycle.
Using the delay wash cycle
Use 4 HOUR DELAY START to run the
dishwasher during off-peak hours to reduce
energy usage or to reduce daytime heat
buildup in your home.
1. Close door firmly until h latches.
2. Press 4 HOUR DELAY START. The pad
indicator will glow red.
3. Press a Cycle pad. The DELAY START
countdown begins when you
press the Cycle pad. If you
don’t press a Cycle pad within
30 seconds, the DELAY
START indicator turns off.
4. If desired, press one or rmre Option pads.
The 4 HOUR DELAY START indicator stays
on until the wash cycle begins.
NOTES:
• Press 4 HOUR DELAY START anytime
during the delay period to start
dishwasher immediately.
• Press CANCEL/DRAIN to cancel the delay
■
cycle. The 4 HOUR DELAY
START indicator will turn off.
Press new Cycle and Option pads.
• You can add Kerns to the load anytime
during the delay countdown. After adding
Kerns, close the door firmly until K latches.
The delay countdown will not continue K
the door is not latched.
15