Before setting the controls, Setting the controls, To start cleaning immediately – Whirlpool SB160PED User Manual
Page 26: To delay the start, F-f if i _m_f u, F-f if i, Nj-u u
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING THE SELF-CLEANING CYCLE
Before setting the controls
Make sure the clock is set to the
correct time of day and the door
is closed.
(See “Setting the clock” on page 11.)
Setting the controls
To start cleaning immediately:
Press the Clean button and turn
the Set Knob until the desired
cleaning time shows on the
display.
• Use 2 hours for light soil.
• Use 3 hours to 4 hours maximum for
moderate to heavy soil.
PRESS
TURN
TURN
TO SET
YOU SEE
Jf-n
n
J-U u
§
O.N
TMt QIAN lOOffD
(example shows 3-hour
cleaning time)
To delay the start:
1. Press the Clean button and turn
the Set Knob until the desired
cleaning time shows on the
display.
• Use 2 hours for light soil.
• Use 3 hours to 4 hours maximum for
moderate to heavy soil.
PRESS
TURN
TURN
TO SET
YOU SEE
_f-f If I
_M_f
u
CIN
TIMf CtfAN LOCXLD
(example shows 3-hour
cleaning time)
2. Immediately press the Stop
Time button and turn the Set
Knob to the new stop time.
The Self-Cleaning cycle will start at a
time equal to the stop time minus the
cleaning time. In the example at the right,
that would be 5:30 minus three hours,
or 2:30.
PRESS
TURN
TURN
TO SET
YOU SEE
lift
1)[LAY
DLLAY
CIN STOP DM! CltAfJ LOCW.D
26
(example shows 5:30 stop time)