Push the start/pause button to start, Stopping/restaiting your washer – Whirlpool LCR5232DQ0 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Select a wash-rinse temperature with
the Temperature Selector. Match the
water temperature with the type of
fabric and soils being washed.
• For water temperature guidelines see
page 16.
o
on both models
7. Turn Cycle Selector Knob to the
desired setting. See page 9.
8. Push the Start/Pause button to start
washer.
• The Cycle Selector Knob will NOT
rotate as the cycle progresses.
• The Cycle Status Lights indicate the
operation being performed within the
cycle.
• When the cycle is complete, all Cycle
Status Lights will be OFF.
NOTE: Once a cycle has been started, the
Cycle Selector Knob MUST be turned to
OFF before a new cycle can be selected.
Wash ^
Rinse Q
Final Spin Q
Stopping/restaiting your washer
• To pause the washer at any time, push the
Start/Pause button. The Cycle Status Lights
will flash while the washer cycle is paused.
If left in pause, the cycle will terminate after
2 hours.
• To restart the washer, close the lid (if
necessary) and push the Start/Pause
button.
• To cancel cycle, turn Cycle Selector Knob
to OFF. Cycle Status Lights will turn off.
NOTE: When lid is opened during a cycle,
all machine operation will stop. Cycle will
resume when lid is closed.