Washer installation, To disconnect washer, Portable two-faucet connections – Whirlpool LCR5232DQ0 User Manual
Page 6: To disconnect the washer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
W A S H E R I N S T A L L A T I O N
To disconnect washer:
• Unplug the electrical power cord and put it
back in its storage area.
• Turn the water faucet off.
• Press the red water flow button to release
the water pressure.
• Move the locking collar down and pull the
hose connector down to disengage from
the faucet adapter.
• Drain water from the hoses through the
hose connector.
• Hang the hoses on the storage rack.
Locking
Portable two-faucet connections
If you have two separate water connections,
your washer can be connected to both the hot
and cold water faucets using Kit #3430190.
This kit can be purchased from your Whirlpool
Dealer.
Connecting the washer:
• Connect the hot and cold water inlet hoses
to the hot and cold faucets.
• Secure the drain hose to the sink or
standpipe.
• Slowly turn the water faucets on all the
way.
• Plug the power cord into a 3-prong
grounded outlet.
To disconnect the washer:
• Unplug power cord and return it to the
storage area.
• Turn water faucets off.
• Disconnect the drain and water supply
hoses. Hang them on the storage rack.