Self-oeaninc your oven, Uchis flash, Ooking – Whirlpool FGS335E User Manual
Page 26: Results, Ndicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING
W
hen
SElf-OEANINC YOUR OVEN
PROBLEM
CAUSE
The Self-Cleaning cycle
will not work
• You did not turn the oven control knob to CLEAN.
• The door is not closed all the way.
C
ooking
results
PROBLEM
CAUSE
Cooking results are
not what you expected
• The oven temperature seems too low or too high. See “Adjusting the oven
temperature control” on page 12 to adjust the oven temperature.
• You did not preheat the oven before baking (if called for in the recipe).
• The recipe you are using may need to be altered to improve the taste or
appearance of the food.
• You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
• There is not enough air space around the pan when baking. Allow 1V
2
to 2
inches of air space on all sides of the pan.
• The flame size does not fit the cookware being used.
• When broiling, you have not completely closed the oven door.
• The flow of combustion and/or ventilation air to the range is blocked. Make
sure nothing is blocking the middle front of the backguard.
• The range is not level. (See the Installation Instructions.)
I
ndicator
ucHis FLASH
PROBLEM
CAUSE
The oven on and heating
indicator lights flash
• You can not bake, broil, or clean. Call for service. (See “If You Need
Assistance or Service” on page 27.)
The heating and door
locked/cieaning indicator
lights flash
• The door lock has failed. Call for service. (See "If You Need Assistance
or Service” on page 27.)
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 27.
26