Citizen Systems CBM-230/231 - Manual (Page 20)

CBM-230/231 User’s Manual
CITIZEN 20
DS1 FUNCTION ON OFF FACTORY SETTING
-1 Paper cutter Equipped Not Equipped *
-2 Cover open Disabled Enabled OFF
-3 Auto loading Enabled Disabled OFF
-4 Input buffer 72 bytes 4K bytes OFF
-5 Paper near end Disabled Enabled OFF
-6 Paper near end remainder 1 OFF
-7 Paper near end remainder 2
Refer to the table below
OFF
-8 CR switching LF activated Ignored OFF
DS2 FUNCTION ON OFF FACTORY SETTING
-1 Print density ON
-2 Print density
Refer to the table below
OFF
-3 International character International OFF
-4 Unused OFF
-5 International character OFF
-6 International character OFF
-7 International character OFF
-8 International character
Refer to the table below
OFF
DS3 ON OFF FACTORY SETTING
-1 Bit length 7 bits 8 bits OFF
-2 Parity Equipped Not equipped OFF
-3 Odd / even Even Odd OFF
-4 DTR / XON-XOFF XON-XOFF DTR / DSR OFF
DS4 ON OFF FACTORY SETTING
-1 Baud rate OFF
-2 Baud rate ON
-3 Baud rate
Refer to the table below
ON
-4 Unused OFF
The Switch segment marked * are set depending on each models.
The DIP switches DS3 and DS4 are only for the serial interface.
Remaining printable Length 0 cm 50 cm 1 m 2 m
DS1-6 OFF ON OFF ON
7 OFF OFF ON ON
Print density Light Standard Dark darker
DS-1 OFF ON OFF ON
-2 OFF OFF ON ON