Adjusting the oven temperature control – Whirlpool FEC330B User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R A N G E
Adjusting the oven temperature control
Oven temperature controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the temperature
settings, you can adjust them by following
these steps:
1. Make sure
the Oven Temperature
Control Knob is turned to the off position.
Pull
knob straight off and
flip
it over.
2
.
Loosen
the locking screws inside the
control knob.
Note the position of the
notches.
3.
To lower the temperature, hold
knob
handle firmly and
move
the tooth a notch
counterclockwise.
Each notch equals
about lO^FiS'C).
4. To raise the temperature, hold
knob
handle firmly and
move
the tooth a notch
clockwise.
Each notch equals about
10°F(5°C).
5. Tighten
the locking screws and
replace
the control knob.
Notches
To raise
Locking screws
13