Whirlpool FREEZERS - Manual (Page 9)

USING YOUR REFRIGERATOR
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between
adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our toll-free number,
1-800-44-ROPER.
RECOMMENDED
CONDITION: REASON: CONTROL SETTINGS:
Refrigerator
section
too warm
• Door opened often
• Large amount of food added
• Room temperature too warm
Refrigerator
Freezer
4
A
Freezer • Door opened often
section • Large amount of food added Refrigerator 3
too warm
• Very cold room temperature Freezer C
(can’t cycle often enough)
Refrigerator
section
too cold
• Controls not set correctly
for your conditions
Refrigerator
Freezer
2
B
Ice not
made fast
enough
• Heavy ice usage
• Very cold room temperature
(can’t cycle often enough)
Refrigerator
Freezer
3
C
Both • Door opened often
sections • Large amount of food added Refrigerator 4
too warm • Very warm or very cold room Freezer B
temperatures
Removing the door shelf fronts
(on some models)
Remove the door shelf fronts for easier
cleaning.
To remove shelf fronts:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the shelf front.
3. Pull shelf front straight out.
To replace shelf fronts:
1. Line up each end of the shelf front with
the button on the door liner wall.
2. Push shelf front straight back until it
snaps securely into place.
3. Replace items on the shelf.