To dispense ice – Whirlpool FREEZERS User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

To dispense ice:

1. Press a sturdy glass against the ice

dispenser bar. Hold glass close to
dispenser opening so ice does not fall
outside of glass.

2. Remove the glass to stop dispensing.

NOTE: The first few batches of ice may
have an off-flavor from new plumbing and
parts. Throw the ice away. Also, take large
amounts of ice from the ice bin, not through

the dispenser.

Ice only

The water dispenser

Chilled water comes from a tank behind
the meat drawer. It holds approximately

1'/2 quarts (1.5 L).

When the refrigerator is first hooked up,

press the water dispenser bar with a sturdy
glass or jar until you draw and discard 2 to
3 quarts (1.9 to 2.8 L). The water you draw
and discard rinses the tank and pipes.

Allow several hours to chill a new tankful.

NOTE: The small tray beneath the
dispenser is designed to evaporate
small spills. There is no drain in this

tray. Do not pour water into it.

To dispense water:

1. Press a sturdy glass against the water

dispenser bar.

2. Remove the glass to stop dispensing.

NOTE: Dispense enough water every week

to maintain a fresh supply.

Ice and water