To change crisper light (on some models) – Whirlpool FREEZERS User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
To change crisper light
(on some models):
1. Unplug the refrigerator.
2. Pull top of light shield forward until it
snaps free.
3. Lower light shield to clear bottom sup
ports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance
bulb.
6. Replace light shield in reverse order.
7. Plug in the refrigerator.
To change the upper freezer light
(on some models):
1. Unplug the refrigerator.
2. Lift top of light shield up and pull
shield out.
3. Replace bulb with a 40-watt appliance
bulb.
4. Place light shield over bulb and snap
shield into place.
5. Plug in the refrigerator.
To change lower freezer light:
1. Unplug the refrigerator.
2. Push in sides of light shield until it
snaps free.
3. Replace bulb with a 40-watt appliance
bulb.
4. Replace light shield.
5. Plug in the refrigerator.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
Lower
freezer
light
22
W I T H Q U E S T I O N S O R C O M M E N T S