Removing the meat drawer and cover, To remove the cover, Adjusting the meat drawer temperature – Whirlpool FREEZERS User Manual

Page 12: Removing the freezer bin/basket, On some models), To remove the bin/basket

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

Removing the meat drawer and cover

To remove the meat drawer:

Pull out to the stop, lift

1. Slide the meat drawer straight out to

the stop.

2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.

To remove the cover:

1. Remove the crisper, the crisper cover,

and the meat drawer.

2. Tilt front of cover up.
3. Lift cover at back and pull straight out.
4. Replace in reverse order.

Adjusting the meat drawer temperature

Cold air flows from the freezer into the meat
drawer. This helps keep the meat drawer
colder than the rest of the refrigerator for
better storage of meats.

Slide the control from side to side to let

more or less cold air through.

Removing the freezer bin/basket

(on some models)

To remove the bin/basket:

1. Slide out to the stop.

2. Lift the front to clear the stop.
3. Slide out the rest of the way.

To replace the bin/basket:

1. Place on the slides.

2. Make sure the wire stops clear the front

of the slides.

3. Slide in all the way.

Pull out to the stop, lift the

front, and pull again.

I c ALL;a è;?iTìl?fCTi^c^

W I T H Q U E S T I O N S O R C O M M E N T S