Disconnecting the dishwasher, Electricai connection, Converting a portable dishwasher to a built-in – Whirlpool 800 Series User Manual
Page 17: Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTING A PORTABLE DISHWASHER
Locking collar
Disconnecting the dishwasher
1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord aixl return to
storage compartment.
6. Return hoses to storage compartment.
Hose connection
Electricai connection
A power supply of 120 volts, 60Hz AC, 15 or
20 amps, is required. For your personal
safety, this appliance must be grounded. This
appliance is equipped with a power supply
cord having a 3-prong grourxJing plug. To
minimize possible shock hazard it must be
plugged into a mating 3-prong grounding type
wall receptacle, grounded in accordance with
the Natiorral Electrical Code aixl local codes
and ordinances. If a mating waU receptacle is
not available, it is the responsibility a^
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by
a qualtfied electrician.
^WARNING
Fire Hazard
An extension cord should not be used
with this appliance.
Do not, under any circumstances,
renfK)ve the power supply cord ground
prong.
Such use may result in a fire, electrical
shock, or other persor^l injury.
3-prong
grounding
cord
3-prong grounding
type wall receptacle
Converting a portable dishwasher
to a built-in
Your Whirlpool Portable Dishwasher can be
converted to a built-in (undercounter) model
by using conversion kit No. 4317856. The kit
is available at your Whirlpool dealer or
authorized Whirlpool service company.
Instructions are included with the kit.
17