Setting the controls, Selecting a wash cycle – Whirlpool 800 Series User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Controls
Operating your dishwasher's controls properly helps you obtain the best possible washing
results. *№is section tells you how to select wash cycles and options.
Selecting a wash cycle
For Series 400,800, and 810 models:
Turn Cycle Control Knob to desired cycle.
For Series 830 models:
Press POTS & PANS button for that cycle. Or press either HEAT
DRY or AIR DRY for NORMAL WASH and LIGHT WASH cycles. Press AIR DRY for RINSE
& HOLD cycle. Turn Cycle Control Knob to desired cycle.
For Series 840 models:
Press
a
cycle pad, then turn the Cycle Control Knob to desired
cycle. NORMAL WASH. LIGHT WASH, and RINSE & HOLD all share the same cycle pad.
NOTE: Your nnodel may have all or some of the cycles shown.
CYCLE
A shows what each cycle includes
CYCLE
TIME
Minutes)
WASH
RINSE RINSE
MAIN
WASH
RINSE
FINAL
RINSE DRY
POTS
&
PANS
Double
wash for
rnaximum
cleaning of
cooked-on or baked-on foods.
•
•
•
•
•
•
•
98*
NORMAL WASH
Double
wash for
normal,
everyday
soiled loads. (The Energy
Guide label is based on this
cycle.)
•
•
•
•
•
•
90*
LIGHT WASH
Single wash
for prerinsed
or lightly
soiled loads.
•
•
•
•
•
85*
RINSE
&
HOLD
days later.
• Do rK>t use detergent.
• Use AIR DRY option.
•
•
20
*Cyd*
tkn*
Muim
dfy
Dm*.
12