Whirlpool 800 Series - Manual (Page 13)

SETTING THE CONTROLS
Canceling a cycle
You can cancel a cycle at any time.
1. Turn the Cycle Control Knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2. Open the door.
3. Turn the Cycle Control Knob to OFF.
Selecting cycle options
You can select a drying option after the
dishwasher starts as long as the Cycle
Control Krtob has not reached DRY.
HEAT DRY option
If the HEAT DRY option is selected, air in
the dishwasher is heated during the “dry”
part of the cycle. For best results, use a
liquid rinse agent.
For Series 830 models, the HEAT DRY
option is automatically selected with the
POTS & PANS cycle.
AIR DRY option
When AIR DRY is selected, the air in the
dishwasher is rK>t heated during the “dry”
portion of a cycle. Using AIR DRY helps
save energy, but dishes take longer to dry
and some spotting can occur. Some items
(such as plastics) may need towel drying.
For best drying, use a liquid rirrse agent.
NOTE: You must choose either AIR DRY or
HEAT DRY for each wash cycle. Select AIR
DRY when using the RINSE & HOLD cycle
(Series 800, 810, 830, and 840 models).
imj
OR
Series 400,800,
and 810 models
imj
Series 400,
800, and 810
models
UHY
□
Series 830 and
840 models
OR DRY
□
Series 830 and
840 models
13