Removing the oven door, Standard-cleaning ovens only), To remove – Whirlpool RBD245PD User Manual
Page 40: To replace, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C A R I N G F O R Y O U R O V E N
Removing the oven door
(standard-cleaning ovens only)
Removing the oven door will help make it
easier to clean the oven.
^WARNING
Personal Injury Hazard
• Oven door is heavy. Use both hands to
remove the oven door.
• Grasp only the sides of the oven door.
Do not use the handle for lifting.
Failure to properly grasp the oven door
could result in personal injury or product
damage.
To remove:
1. Open
the door all the way.
2. Insert
a door removal pin into each hinge
hole from the inside, out.
3. Close
the door of the way shut or until
it contacts the pins.
4. Grasp
the sides of the oven door.
Move
door toward oven and
lift slightly
to
remove.
5. Set
door aside on protected surface.
To replace:
1. Fit
hinge arms into slots in frame.
2.
Open
the door all the way.
3.
Remove
the door removal pins from
each hole.
4.
Close
the door.
NOTE:
If the door does not operate freely,
you have not installed it properly. Repeat
Steps 1-4.
40