Set start time, Complete entry, Notes – Whirlpool RBD245PD User Manual

Page 23: You see, When start time is reached, When baking/roasting is done, I l - u u

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R O V E N

Set start time.

Press the “up” (A) or “down” (T) pad(s)
until the correct time shows on the display.

Example at right shows a desired start

time of 2 o’clock. The oven will auto

matically shut off at 2:30 (the set start
time plus the set cook time).

(example shows 2 o’clock start

time)

8. Complete entry.

NOTES:
• You can change

the temperature or

time settings any time after pressing
the Start/Enter pad by repeating

Steps 2 through 8.

• The display

will show “door” and the

heating elements will not heat if the

door is open when you try to bake/

roast.

PRESS

YOU SEE

I j n n

I L - U U

9. When start time is reached:

A 1 -second tone will sound. The
display will count down the baking/

roasting time in hours and minutes (if

cook time is more than one hour) or in
minutes and seconds (if cook time is

less than one hour).

YOU SEE

(display counts down cook

time)

10. When baking/roasting is done:

The oven will turn off automatically and
beep four times. You will also hear four

1 -second tones every minute until you

press the Off/Cancel pad.

NOTE:

To disable reminder tones,

press and hold the Cook Time pad for
5 seconds. To reactivate tones, repeat
this step.

YOU SEE

continued on next page