Set temperature (optional), Press cook time pad, Set cook time – Whirlpool RBD245PD User Manual

Page 19: Start oven, Notes, You see, When baking/roasting is done, J n c ' ? ' j o c d

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R O V E N

3. Set temperature (optional).

Do this step if you want to set a tempera

ture other than 350°F. Press ▲ to raise the
temperature or ▼ to lower the temperature

in 5°F amounts. Use these pads until the
desired temperature shows on the small
display. (If the Temp pads are held down
the temperature will change faster.)

PRESS

YOU SEE

(example shows Bake at 375°F)

4. Press Cook Time pad.

PRESS

YOU SEE

5. Set cook time.

Press the “up" (A) or “down" (▼) pad(s)
until the correct time shows on the display.

PRESS

YOU SEE

(example shows 30-minute
baking/roasting time)

6. Start oven.

NOTES:

•You can change

the temperature or

time settings any time after pressing the

Start/Enter pad by repeating Steps 2
through 6.

•The display

will show “door” and the

heating elements will not heat if the door
is open when you try to bake/roast.

•When you press the Start/Enter pad,

the display will count down the baking/

roasting time in hours and minutes (if
cook time is more than one hour) or in
minutes and seconds (if cook time is less

than one hour).

PRESS

YOU SEE

j n C ' ? ' J O C D

I J I

(display counts down
cook time)

7. When baking/roasting is done:

The oven will turn off automatically and

beep four times. You will also hear four

1 -second tones every minute until you

press the Off/Cancel pad.

NOTE:

To disable reminder tones, press

and hold the Cook Time pad for 5 seconds.
To reactivate tones, repeat this step.

YOU SEE

continued on next page