Starting a wash cycle, Stopping the dishwasher, Starting your dishwasher – Whirlpool 960 Series User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting Your Dishwasher

This section tells you how to start or stop your dishwasher. Refer to it for quick reference.

Starting a wash cycle

1. Load the dishwasher. See pages 6-9.

2. Spin the spray arms. They should

turn freely.

3. Add detergent. See page 10.

5. Close door firmly until it latches.

6. Run hot water at the sink nearest the

dishwasher until water is hot.
Turn water off. See page 19.

7. Press a Cycle pad. If desired, press one

or more Option pads. (See
pages 12-14.) The dishwasher
starts filling once you press a
Cycle pad unless you select
the delay wash cycle. You

may press Option pads as the machine
is filling.

The pad indicator glows red when a cycle

or an option is selected.

Add rinse agent, if needed. See page 11.

L=-

Stopping the dishwasher

You can stop your dishwasher anytime
during a cycle. All you have to do is:
• Open the door slightly. Wait for any filling

or spraying action to stop before opening
the door all the way. Close door to con
tinue cycle.

• Press CANCEL/DRAIN. Once pressed, a

2-minute drain starts. See page 13.