Setting the controls, Selecting a wash cycle, Setting the controis – Whirlpool 960 Series User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you

select the delay wash cycle. You may press Option pads as the machine is filling.

CYCLE

A shows what each cycle includes

WASHRINSE

MAIN

WASH RINSE

FINAL

RINSE DRY

CYCLE

TIME

(Minutes)

Rinse/Wash Later

For rinsing a few items to
be washed one or more

days later.
• Do not use detergent.
• Water is not heated

during RINSEA/VASH LATER.

• AIR DRY is automatically selected.

Low Energy/China

Single wash for prerinsed
or lightly soiled loads.
•Select HIGH TEMP

WASH to heat water in
the main wash (marked^).

• The water heats to 140°F (60°C)

in the final rinse (marked unless
you select LOW ENERGY RINSE.

•t

•tt

60*

Normal

Double wash for normal,

everyday soiled loads.
(The Energy Guide label
is based on this cycle.)
•Select HIGH TEMP

WASH to heat water in the main
wash (marked+).

• The water heats to 140°F (60°C)

in the final rinse (marked ^^) unless

you select LOW ENERGY RINSE.

•rt