There is mm in the defrost drain pan, Here, Defrost – Whirlpool ED20TWXDN02 User Manual
Page 30: Drain, Motor, Seems, Much
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING GUIDE
T
here
is
mm
in
the
defrost
drain
pan
Check if...
Then...
The refrigerator is defrosting.
The water will evaporate. It is normal for water to drip
into the defrost pan.
it is more humid than normal.
Expect that the water in the defrost pan will take longer
to evaporate. This is normal when it is hot or humid.
Water in the defrost pan is overfiowing.
Check to make sure your refrigerator is level. (See
“Leveling it" on page 8.) If it is stili overflowing there is
probably something wrong with the refrigerator. Call
the Consumer Assistance Center at 1-800-253-1301.
T
he
motor
seems
to
run
too
much
Check if...
Then...
The room temperature is hotter than normal.
Expect the motor to run longer under warm conditions.
At normal room temperatures, expect your motor to
run about 40% to 80% of the time. Under warmer
conditions, expect it to run even more of the time.
A large amount of food has just been added to
the refrigerator.
Adding a large amount of food warnis the refrigerator.
It is normal for the motor to run longer in order to
cool the refrigerator back down. See food storage
on page 27.
The door is opened often.
Expect the motor to run longer when this occurs. In
order to conserve energy, try to get everything you
need out of the refrigerator at once, keep food orga
nized so it is easy to find, and close the door as soon
as the food is removed.
The controls are not set correctly for the
surrounding conditions.
See “How the controls work” on page 12.
The doors are not closed completely.
Push the doors firmly shut. If they will not shut all the
way, see “The doors will not close completely,” on
page 35.
The doors are misaligned.
See “Leveling it” on page 8 or call the Consumer
Assistance Center at 1-800-253-1301.
The base grille is dirty or blocked.
This prevents air circulation and makes the motor
work harder. Remove the grille and clean. See
Removing the base grille” on page 25.
The condenser coils are dirty.
This prevents air transfer and makes the motor work
harder. Clean the condenser coils. See "Cleaning
your refrigerator” on page 25.
If the problem is not due to any of the above, remem
ber that your new refrigerator wili run longer than your
old one due to its high efficiency motor.
30
1-800-253-1301
WITH QUESTIONS OR COMMENTS