To change the light below the ice bin, To change the upper freezer light, To change the dispenser area light – Whirlpool ED20TWXDN02 User Manual
Page 22: Hanging, Uchtbuui, Cont
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
C
hanging
THE
uchtbuui
S(
cont
.)
To change the light below the ice bin:
1. Push in the sides of the light shield and pull
down until the shield snaps free.
2.
Replace the bulb with a 40-watt appliance bulb.
3.
Replace the light shield.
To change the upper freezer light
(on some models):
1. Remove the light shield by grasping the top
center of the shield and pulling forward while
turning it slightly to one side.
2.
Replace the bulb with a 40-watt appliance bulb.
3.
To replace the light shield;
• Grasp the top center of the shield and insert
the tabs on one end into the slotted holes in
the freezer liner.
• Carefully bend the shield at the center to insert
the tabs on the other end.
To change the dispenser area light:
1. Reach through the dispenser area to remove
the bulb.
2.
Replace the bulb with a heavy-duty 10-watt
bulb, which can be purchased from your
Whirlpool dealer.
Dispenser
Light
22
1-800-253-1301
WITH QUESTIONS OR COMMENTS