Removing the meat drawer and cover, To remove the meat drawer, To remove the cover – Whirlpool ED20TWXDN02 User Manual

Page 15: Adiusting, Emoving, Meat, Drawer, Cover, Temperature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR REFRIGERATOR

emoving

the

meat

drawer

and

cover

To remove the meat drawer:

• Slide the meat drawer straight out to the stop.

• Lift the front slightly and slide it out the rest of

the way.

• Replace in the reverse order.

To remove the cover:

• Remove the meat drawer and the crisper.

• Lift the front of the cover off of the supports and

remove it by puliing up and out.

To replace the cover:

• Fit the back of the cover into the notch

supports on the waiis of the refrigerator and

lower it into piace.

• Repiace the meat drawer and crisper.

ADIUSTING

the

meat

drawer

temperature

(ON SOME MODEIS)

The meat drawer is cooled from cold air that flows

in from the freezer
compartment through
a vent in the wall of

the refrigerator (See

“Ensuring Proper Air
Circuiation” vent C on
page 13.) This helps to
keep the meat drawer

colder than the rest of
the refrigerator for

better storage of meats.

To adjust the temperature, slide the control from
side to side to let more or less cold air into the meat

drawer. Set the control toward Cold for a slightly
cooler temperature, or toward Colder for a much
cooler temperature.

NOTE: Putting the control on the coldest setting

may cause freezing or ice crystals, depending on
the items you have in the meat drawer.