Setting the controls, Selecting a wash cycle – Whirlpool 830 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
For Series 400, 800, 806, and 810 models:
Turn Cycle Control Knob to desired cycle.
For Series 830 models:
Press Pots & Pans button for that cycle. Or
press either Heat Dry or Air Dry for Normal
Wash and Light Wash cycles. Press Air Dry
for Rinse & Hold cycle. Turn Cycle Control
Knob to desired cycle.
For Series 840 models:
Press a cycle pad, then turn the Cycle
Control Knob to desired cycle. Normal
Wash, Light Wash, and Rinse & Hold all
share the same cycle pad.
NOTE:
Your model may have all or some of
the cycles shown.
CYCLE
A shows what each cycle includes
CYCLE
TIME
(Minutes)
WASH RINSE RINSE
MAIN
WASH RINSE
FINAL
RINSE DRY
POTS
&
PANS
Double
wash for
maximum
cleaning of
cooked-on or baked-on foods.
•
•
•
•
•
•
•
98*
NORMAL WASH
IjH
wash for
normal,
everyday
soiled loads. (The Energy
Guide label is based on this
cycle.)
•
•
•
•
•
•
90*
LIGHT WASH
Single wash
for prerinsed
soiled loads.
•
•
•
•
•
85*
RINSE
&
HOLD
one or more
days later.
• Do not use detergent.
• Use Air Dry option.
•
•
20
* Cycle time includes dry time.
13