Whirlpool 8900 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R D I S H W A S H E R
Cycle
A shows what steps are in each cycle
Wash Rinse
Main
Wash Rinse Rinse Dry
Cycie
Time
(Minutes)
Heavy Wash
A double wash for
cleaning heavily soiled
loads.
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t) if the Lo-Energy
Rinse option is not selected. If the Hi-
Temp Wash option is selected
water will also be heated in the main
wash (marked ft)- See pages 10 and 11.
•tt
•t
76*
Normal Wash
A double wash for
normal, everyday soiled
loads. (The Energy
Guide Label is based on this cycle.)
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57”C) in the
final rinse (marked t) if the Lo-Energy
Rinse option is not selected. If the Hi-
Temp Wash option is selected
water will also be heated in the main
wash (marked tt)-
pages 10 and 11.
•n
•t
66
*
Light Wash
A single wash for
pre-rinsed or lightly
soiled loads.
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t) if the Lo-Energy
Rinse option is not selected. If the Hi-
Temp Wash option is selected
water will also be heated in the main
wash (marked tt)- See pages 10and 11.
•tt
•t
60*
‘ Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher.
continued on next page
9