Water temperature tips, To check water temperature, Energy saving tips – Whirlpool 8900 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R D I S H W A S H E R

Water temperature tips

Hot water dissolves and activates the

dishwashing detergent. Hot water also
dissolves grease on dishes and helps dry
glasses spot-free. Use the Hi-Temp Wash
option if you keep your water heater at a low
setting.

For best dishwashing results, water must

be at least 120°F (49°C) as it enters the
dishwasher.

To check water temperature

1. Run hot water at the faucet closest to

your dishwasher. Let the water run for at

least one minute.

2. Measure the water temperature w'lth a

candy or meat thermometer. Put the
thermometer in the running stream
of water.

3. If the water temperature at the faucet is

below 120°F (49°C), have a qualified
person raise the water heatei^s thermo
stat setting.

Energy saving tips

You can help save energy if you:
• Wash full loads. Running a half-filled

dishwasher uses the same amount of
electricity and hot water as a fully loaded

machine.

• Use the Light Wash Cycle whenever

possible. The cycle uses less hot water
and energy than the Normal Wash Cycle.

• Use the Air Dry option when you don't

need a rapid drying cycle. Allow longer

drying times (overnight). Use a rinse agent
to improve drying.

• Do not use the Hi-Temp Wash option.

When this option is off, the dishwasher will

not pause to heat water to 135°F (57°C)

during the main wash.

NOTE: Loads may not wash as well if the
water temperature is too low.

• Use the Lo-Energy rinse option. The

automatic water heating in the final rinse
will be turned off.

NOTE: Loads may not dry as well if the

water temperature is too low. Use a liquid

rinse agent.

• Load correctly for best washing results.

Incorrect toading may cause poor washing

and the need to rewash all or part of
the load.

• Do not pre-rinse normally soiled dishes.

Select the correct cycle for the load and
use the recommended amount of detergent

for good washing results without hand

rinsing.

• Use your dishwasher during off-peak

hours. Local utilities recommend this to
avoid heavy usage of energy at certain

times of day.