Whirlpool ED25SMIII - Manual (Page 7)

Removing the crispée, meat pan and covers...
To remove the crisper and meat pan:
1. Slide crisper and meat pan straight out to stop.
2. Lift the front. .
3. Slide the rest of the way out.
4. Replace In reverse order.
To remove the covers:
• Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way.
2. Lift cover front.
3. Lift back off the pegs.
4. Replace in reverse order
Push the Tab
to Clear the Cover.
Snap Back Into Place.
Changing the light hulbs...
WARNING: Before removing a light shield for
cleaning or for replacing the bulb,
either unplug refrigerator or discon­
nect electricity leading to refrig­
erator at the main power supply.
Shock and injury can occur If elec­
tricity remains connected.
Light bulbs behind refrigerator and freezer con­
trol consoles:
1. Pull control knob straight off.
2. Pull bottom of control panel straight out.
3. Lift top of panel oft supports.
4. Replace with a 40-waft appliance bulb.
5. Replace panel in reverse order.
Light bulb behind ice maker:
1. Remove the ice bin (see ice maker instructions
page9).
2. Replace with a 40-waft appliance bulb.
3. Replace ice bin.
Dispenser light:
1. Reach the bulb through the dispenser area.
2. Replace with a heavy-duty 10-waft bulb.
Removing the base grille
1. Open the doors.
2. Pull grille outwards as shown.
3.
Do not remove Tech sheet fastened behind grille.
Metal Clips
_ Support Tabs
To replace:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.