beautypg.com

Adjusting crisper humidity control, Adjusting meat pan temperature, Adjusting the refrigerator shelves – Whirlpool ED25SMIII User Manual

Page 6: Removing freezer shelves, Removing the freezer basket

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Adjusting crisper

Humidity Control...

You can control the amount ot humidity in the mois­
ture-sealed crisper

1, The control can be adjusted to any setting be­

tween LO and HI.

2,

LO

(open] lets moist

air out of crisper for
best storage of fruits
and vegetables

with skins,

3,

HI

(closed) keeps

moist air in the cris­
per for best storage
of fresh leafy vege­

tables.

Adjusting meat pan temperature.

Cold air flows against the

meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.

Set the control to let more or

less cold air through

Use Control to Adjust

Meat Pan Temperatures

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.

To remove glass shelves

1. Tilt up at front.

2. Lift up at back.
3. Pull shelf straight out.

Glass shelves are

heavy. Be careful.

To replace:

1. Guide the rear hooks into the slots in the shelf

supports,

2, Tilt up front of shelf until hooks drop into slot. Lower

front of shelf to level position

Removing freezer shelves...

1, Lift front slightly.

2, Lift back off supports,
3, Replace in reverse order.

To remove door shelves:

• Lift up and out

To replace:

• Insert hooks into guides

on both sides.

• Push down.

Removing the freezer basket...

For proper air movement, keep the freezer basket

in place when the refrigerator is operating.

To remove the basket:

• Slide out to the stop
• Lift the front to clear the stop.
• Slide out the rest of the way.

To replace the basket:

• Place basket on the slides.
• Make sure the wire stops

clear the front of the slides,

• Slide basket in.