Whirlpool ED25SMIII - Manual (Page 5)

Setting the controls...
The Temperature Control is in the refrigerator and
the Air Control is in the freezer section. When the
refrigerator is plugged in for the first time...
1, Set the TEMPERA­
TURE CONTROL to 3,
2, Set the AIR CON­
TROL to3.
Changing the control settings...
If you need fo adjust temperatures in the refriger­
ator or freezer, use the settings listed in the chart
below.
Give the refrigerator time to cool down com­
pletely before adding food. (This may take sev­
eral hours,)
These settings should be about right for
normal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream
is firm.
Do not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
• Adjust the Temperature Control first,
• Wait at least 24 hours between adjustments.
• Then adjust the Air Control, if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
...call your If Refrigerator
COOL-LINE ‘
service
assistance
telephone
number
(pagete)
Section is
TOO COLD
If ICE isn't
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
Power Saving Control...
The Power Saving Control on the Control Con­
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of fhe refrigerator.
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
OFF
RECOMMENDED SETTINGS:
Temperature Control 4
Air Control 3
Temperature Control
Air Control
Temperature Control
Air Control
Temperature Control
Air Control
Temperature Control
Air Control
3
4
2
3
3
4
3
2
IFF^______ _ ^__________________ ^ON
Use the "OFF" set­
ting when humidity
is low.
2, Use the "ON" setting
if moisture forms
on the outside of the
refrigerator.