Personalizing the front panel, Removing the protective cover, Replacing the protective cover – Whirlpool 3QACM07XD2 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^SONAMZING THE FRONT PANEL

Personalizing the
Front Panel

(available on select models)

The appearance of the front panel can be customized to suit your tastes or to match the

room. The panel has a clear, protective plastic cover that you can remove. Then, place

wallpaper, fabric, pictures, etc., in the open area and replace the protective cover.

Removing the protective cover

1. Place the flat edge of a screwdriver into

the 1 mm gap between the protective
cover and the front panel.

2. Carefully pry off the protective cover.

Replacing the protective cover

1. Insert tabs on one side of the protective

cover into the tabs in the corresponding
side of the front panel.

2. Snap the other side of the cover into

place.