Whirlpool 3QACM07XD2 - Manual (Page 10)

IliSTALLING YaURJ^IR COMDITIONliR
Installing Your
Air Conditioner
In This Section
Page
Page
General information ........................... mj
Installation procedure......... ............. 12
General information
Location Clearance
Your air conditioner will work well in any • Keep outside air intake louvers clear.
location. However, the preferred location for
the unit is on a wall out of direct sunlight.
The location should also provide:
• Adequate support for the weight of
the unit.
• An electricai outlet within reach of
the power supply cord.
• Free movement of air to the room(s) to
be cooled.
• Free movement of air to the air intake
louvers (inside and outside).
Front
cover -
^ 290 mm ^
Outside air
intake louvers
> If the wall is greater than 290 mm thick, cut
the wall back on a 45° angle if possible.
The power
supply cord can
be fed through
either side of the
front panel.
Electrical outlet must be available
within reach of the power supply cord.
DO NOT use an extension cord.
' Allow sufficient clearance around the sides
and rear of the unit.
Cabinet dimensions
The cabinet dimensions are as follows:
Width ............................................... 470 mm
Height ............................................. 350 mm
Depth (with front panel) ................... 600 mm
350 mm
minimum
clearance
10